Convert your cordless blinds to corded blinds for enhanced safety and convenience. This simple modification ensures child safety by eliminating dangling cords, a potential hazard for young children and pets. Additionally, corded blinds provide precise control over light and privacy, allowing you to customize your home’s ambiance effortlessly.
To initiate the conversion, gather necessary tools such as a screwdriver, pliers, and a safety cord tensioner. Remove the cordless mechanism by carefully unscrewing the screws holding it in place. Once removed, the next step involves installing the cord tensioner. Position it on the headrail and secure it with screws, ensuring a firm hold.
With the cord tensioner in place, proceed to attach the new cord to the blind’s headrail. Thread the cord through the tensioner and attach it securely to the corresponding hook or bracket on the headrail. Repeat this process for all cords, maintaining an even tension throughout. Finally, reattach the headrail to the window frame, ensuring a secure fit.
Attaching the Cord to the Tilt Bar
To attach the cord to the tilt bar, follow these detailed steps:
1. Feed the Cord Through the Hole in the Tilt Bar
Locate the hole in the center of the tilt bar. Feed the looped end of the cord through this hole, ensuring that the loop is facing the back of the blind.
2. Thread the Cord Through the Hook
On the back of the tilt bar, find the small metal hook or hook-like protrusion. Thread the looped end of the cord through this hook, creating a small loop.
3. Tighten the Looped End
Pull on the hanging end of the cord to tighten the looped end around the hook. Make sure the loop is snug and secure.
4. Secure the Cord with a Knot
Once the loop is tightened, tie a small, secure knot in the hanging end of the cord. This will prevent the cord from slipping off the hook.
5. Trim the Excess Cord
Use sharp scissors to trim any excess cord, leaving about 1-2 inches of slack.
6. Wrap the Cord Around the Cleat
Locate the cleat on the back of the headrail. Wrap the hanging end of the cord around the cleat in a clockwise direction, creating a snug fit. This will keep the cord in place and prevent it from unraveling.
| Step | Description | Image |
| 1 | Feed the cord through the hole in the tilt bar. | [Image] |
| 2 | Thread the cord through the hook. | [Image] |
| 3 | Tighten the looped end. | [Image] |
| 4 | Secure the cord with a knot. | [Image] |
| 5 | Trim the excess cord. | [Image] |
| 6 | Wrap the cord around the cleat. | [Image] |
How to Convert Cordless Blinds to Corded
Converting cordless blinds to corded blinds is a relatively simple process that can be completed in a few steps. Here are the steps on how to convert cordless blinds to corded:
- Remove the cordless lift mechanism from the blinds. This is usually done by unscrewing the screws that hold the mechanism in place.
- Install the corded lift mechanism. The corded lift mechanism will typically come with instructions on how to install it.
- Attach the cords to the blinds. The cords will typically be attached to the top of the blinds and then run through the holes in the blinds.
- Test the blinds to make sure they are working properly.
People Also Ask About How to Convert Cordless Blinds to Corded
Can I convert any cordless blinds to corded blinds?
Most cordless blinds can be converted to corded blinds, but there are some exceptions. If you are unsure whether your blinds can be converted, you should contact the manufacturer.
What are the benefits of converting cordless blinds to corded blinds?
There are several benefits to converting cordless blinds to corded blinds, including:
- Corded blinds are more durable than cordless blinds.
- Corded blinds are less likely to break or malfunction.
- Corded blinds can be opened and closed more easily than cordless blinds.
- Corded blinds are more secure than cordless blinds.
