10 Simple Steps to Enable Flash on Chrome

Featured Image: [Image of a Chrome browser window with Flash enabled]

Adobe Flash has been phased out as of December 2020 due to security concerns. As such, enabling Flash on Chrome is no longer possible. Websites that still rely on Flash will need to be updated to use HTML5 or other supported technologies.

If you are still encountering websites that require Flash, you may be able to use a third-party browser that still supports Flash. However, it is important to note that these browsers may not be as secure as Chrome and could put your computer at risk. Additionally, many websites are moving away from Flash, so it is likely that you will encounter fewer and fewer websites that require it over time.

For these reasons, it is recommended that you do not enable Flash on Chrome. If you must access a website that requires Flash, you should use a third-party browser that still supports it. However, you should be aware of the security risks associated with doing so.

Verify Flash Availability

Before enabling Flash on Chrome, it’s crucial to verify if the browser still supports this technology. Follow these steps to check its availability:

Using the Browser’s Flash Settings Page

Open Google Chrome.
In the address bar, type "chrome://plugins" and press Enter.
Locate the Adobe Flash Player entry.

If you see the entry with “Enabled” or “Ask to activate” status, Flash is still available and can be enabled.

Using the Chrome Web Store

Open Google Chrome.
Visit the Chrome Web Store at chrome.google.com/webstore.
Search for "Flash Player."
Check the results.

If you see an extension called “Adobe Flash Player” available for installation, it indicates that Flash is no longer built into Chrome and requires an extension.

Using a Flash-Enabled Website

Visit a website that uses Flash, such as YouTube or Newgrounds.
If you see a prompt asking you to activate Flash, it confirms that the browser can still use it.
Click the "Allow" button to enable Flash for the website.

Method	Indicates Flash Availability
Browser’s Flash Settings Page	“Enabled” or “Ask to activate”
Chrome Web Store	Adobe Flash Player extension available
Flash-Enabled Website	Prompt to activate Flash

Enable Flash Using Chrome Settings

Follow the below steps to manually enable Flash on Google Chrome:

Open Chrome Settings: Click the three dots in the top right corner of the browser, then select “Settings.”
Search for “Flash”: In the search bar at the top of the Settings page, type “Flash” and press Enter.
Toggle Flash to “Allowed”: Under “Site settings,” find the option for “Flash” and click to toggle the switch to “Allowed.”
Relaunch Chrome: Once you’ve made the change, you need to relaunch Chrome for the new settings to take effect.

Additional Notes:

If you encounter any issues after enabling Flash, try disabling and then re-enabling the setting.
You can also manage Flash settings for specific websites by clicking “Manage permissions” next to the “Flash” option in Site settings.

Flash Plugin Compatibility:

It’s important to note that Flash is an aging technology that’s gradually becoming obsolete. Most modern websites now use HTML5 and other technologies that don’t require Flash. As a result, the Flash plugin may not be compatible with all websites.

Access Flash Content in Chrome

To access Flash content in Chrome, you’ll need to enable Flash Player as a plugin. Here’s a step-by-step guide:

1. Check if Flash Player is Installed

First, confirm that Flash Player is installed on your computer. To do this, visit and click on “Check Now”. If Flash Player is not installed, follow the installation instructions provided.

2. Enable Flash Player in Chrome

Once Flash Player is installed, you need to enable it in Chrome. To do this:

Open Chrome and click on the three dots icon in the top-right corner.
Select “Settings” from the drop-down menu.
Scroll down to the “Privacy and security” section and click on “Site settings”.
Under “Content”, click on “Flash”.
Use the toggle switch to enable Flash Player.

3. Allow Flash for Specific Sites

By default, Flash Player is disabled for all websites. To allow Flash for specific sites:

Visit the website where you want to enable Flash.
Click on the lock icon in the address bar and select “Site settings”.
Under “Flash”, select “Allow” from the drop-down menu.

You may need to refresh the page for the changes to take effect.

Flash Setting	Description
Disabled	Flash is disabled for all websites.
Ask to enable	Chrome will ask you if you want to enable Flash for each website.
Allow	Flash is enabled for the current website.
Always allow on this site	Flash is always enabled for the current website, even after you close and reopen Chrome.

Check Flash Preferences

To check your Flash preferences, you can access the Flash settings panel managed by Google Chrome. Here’s how to do it:

Open Google Chrome and click on the three-dot menu icon in the top-right corner.
Select “Settings” from the menu.
Scroll down and click on “Advanced” to expand more options.
Under “Privacy and security,” click on “Site Settings.”
Scroll down again and click on “Flash.”

On the Flash settings page, you can view and modify the following options:

Ask First

When this option is enabled, Chrome will ask for your permission before running Flash content on websites. Every time you visit a website with Flash content, you’ll see a notification asking if you want to allow or block the content.

Block

Selecting this option will prevent all Flash content from running on any website you visit. This is a more restrictive setting that ensures no Flash content is executed on your browser.

Allow

With this option enabled, Chrome will allow Flash content to run without asking for your permission. Please note that allowing Flash content can pose security and performance risks, so it’s recommended to proceed with caution.

Option	Description
Ask First	Prompts for user confirmation before running Flash content.
Block	Prevents all Flash content from running.
Allow	Permits Flash content to run without user confirmation.

Troubleshoot Flash Issues

1. Check Browser Settings

Ensure Flash is enabled in your Chrome browser settings by navigating to chrome://settings/content/flash and toggling “Allow sites to run Flash” to “On.”

2. Update Chrome and Flash

Install the latest versions of Chrome and the Flash plugin. Outdated versions may cause Flash compatibility issues.

3. Disable Browser Extensions

Certain browser extensions can interfere with Flash. Disable all extensions and re-enable them one by one to identify any potential culprits.

4. Clear Cache and Cookies

Corrupted cache or cookies can hinder Flash functionality. Clear your browser’s cache and cookies by navigating to chrome://settings/clearBrowserData and selecting the appropriate options.

5. Inspect Flash Security Settings

Setting	Description
Allow Flash to run in Protected Mode	Prevents Flash from accessing certain system resources for enhanced security.
Allow Flash to access camera and microphone	Enables Flash to access your computer’s camera and microphone for certain applications.

These settings can be adjusted in the Flash Player Settings Manager, accessible by right-clicking on any Flash content and selecting “Settings.”

Install Flash Extension

1. Open the Chrome Web Store.

2. Search for “Flash”.

3. Click on the “Add to Chrome” button.

4. Confirm the installation.

5. Restart Chrome.

6. Check for Flash plugins.

Once you’ve installed the Flash extension, you need to make sure it’s enabled. Here’s how:

Open Chrome and go to “chrome://plugins”.

Name	Status
Adobe Flash Player	Enabled

Look for the “Adobe Flash Player” entry in the list of plugins.
Make sure the status is “Enabled”. If it’s not, click on the “Enable” button.

Now Flash should be enabled on Chrome and you can start using Flash-based content.

Enable Click-to-Play

By default, Chrome blocks Flash content from automatically playing on websites. To enable the click-to-play option, follow these steps:

Open Chrome.
In the address bar, type “chrome://settings/content/flash” (without the quotation marks).
Click on the “Click to Play” radio button.

Now, when you visit a website that contains Flash content, you will need to click on the “Allow” button before the content will play.

Customizing Flash Settings for Specific Websites

You can also customize the Flash settings for specific websites. To do this:

Open Chrome.
In the address bar, type the URL of the website you want to customize.
Click on the “padlock” icon in the address bar.
Scroll down to the “Flash” section.
Select the desired option from the drop-down menu.

You can choose from the following options:

Option	Description
Always allow	Flash content will always play on the specified website.
Block	Flash content will never play on the specified website.
Ask (Default)	You will be prompted to allow or block Flash content on the specified website each time you visit.

Manually Activate Flash

You can manually activate Flash for each site you visit by following these steps:

1. Allow Flash on a Specific Site

Visit the website where you want to enable Flash. Click the lock icon in the address bar, then click “Site settings.” Under “Flash,” select “Allow.” You’ll need to refresh the page to apply the changes.

2. Allow Flash on All Sites

If you want to enable Flash on all websites, type “chrome://settings/content/flash” in the address bar and press Enter. Toggle the “Ask first” switch to “Allow.” This will enable Flash on all websites without any further prompts.

3. Allow Flash in Incognito Mode

To enable Flash in Incognito mode, type “chrome://flags/#enable-incognito-flash” in the address bar and press Enter. Click the “Enable” dropdown and select “Enabled.” Restart Chrome to apply the changes.

4. Allow Flash for a Single Session

You can temporarily allow Flash for a single session by visiting a website with Flash content. Click the lock icon in the address bar, then click “Flash.” Select “Allow this time.” Flash will be enabled for that session only.

5. Allow Flash for a Persistent Session

To allow Flash for a persistent session, visit a website with Flash content. Click the lock icon in the address bar, then click “Flash.” Select “Always allow on this site.” Flash will be enabled for that site until you manually disable it.

6. Manage Flash Permissions

To manage Flash permissions for individual websites, visit “chrome://settings/content/flash” in the address bar. Under “Allow,” you’ll see a list of websites that have been manually allowed to use Flash. You can remove any site from the list by clicking the “X” icon.

7. Reset Flash Permissions

If you’ve made changes to Flash permissions and want to reset them, type “chrome://settings/resetProfileSettings” in the address bar and press Enter. Click the “Reset settings” button and confirm your choice.

8. Use a Flash Enabler Chrome Extension

If you’re having trouble enabling Flash manually, you can install a Flash enabler Chrome extension. These extensions can help you automatically enable Flash on all websites or for specific sites. Some popular Flash enabler extensions include:

Extension	Features
FlashControl	Enables Flash on a per-site or global basis, customizes click-to-play behavior
Flash Auto Click	Automatically clicks the “Allow” button for Flash prompts
Always Enable Flash	Enables Flash on all websites without any prompts

Outdated Version of Flash

If you encounter issues with Flash not working properly, it is crucial to ensure that you are using the most up-to-date version. Outdated versions of Flash may lack essential security patches and bug fixes, leading to stability and performance problems.

To check for updates, visit the Adobe Flash Player download page.

Alternatively, you can enable automatic updates by following these steps:

Open Google Chrome.
Type “chrome://components/” in the address bar and press Enter.
Locate “Adobe Flash Player” in the list.
Click “Update” (if available).

Once the update is complete, restart Chrome for the changes to take effect.

Flash Version	Chrome Version
32.0.0.465	96.0.4664.110
32.0.0.463	95.0.4638.69
32.0.0.387	94.0.4606.81

Enable Flash on Chrome

Adobe Flash Player is a multimedia player that allows you to view animations, videos, and interactive content on the internet. While Flash is no longer widely used, it is still necessary for certain websites and applications.

To enable Flash on Chrome, follow these steps:

Open Chrome and go to the website you want to view.
Click the lock icon in the address bar.
Select “Site settings”.
Under “Flash”, select “Allow”.
Reload the page.

Disable and Re-enable Flash

Disable Flash

To disable Flash on Chrome, follow these steps:

Open Chrome and go to the website you want to view.
Click the lock icon in the address bar.
Select “Site settings”.
Under “Flash”, select “Block”.
Reload the page.

Re-enable Flash

To re-enable Flash on Chrome, follow these steps:

Open Chrome and go to the website you want to view.
Click the lock icon in the address bar.
Select “Site settings”.
Under “Flash”, select “Allow”.
Reload the page.

Advantages of enabling Flash	Disadvantages of enabling Flash
– Allows you to view animations, videos, and interactive content on the internet.	– Can slow down your browsing experience.
– Is still necessary for certain websites and applications.	– Can be a security risk.

How to Enable Flash on Chrome

Flash is a multimedia platform that allows you to view interactive content on the web. However, Adobe has discontinued support for Flash, so it is no longer available on Chrome. If you need to view Flash content, you can use a different browser such as Firefox or Internet Explorer.