Prepare the Apple
To prepare the apple for your pipe, you’ll need to carefully hollow it out to create a chamber for the tobacco. Here’s a detailed walkthrough:
1. Core the Apple
Use an apple corer to remove the core from the apple. This will create a hollow space that will serve as the pipe bowl.
2. Enlarge the Bowl
Using a sharp knife, carefully scrape away the flesh around the edges of the bowl, making it wider and deeper. Be precise and avoid cutting through the skin. The size of the bowl will determine how much tobacco you can pack in.
Here’s an approximate guide for bowl enlargement:
| Pipe Size | Bowl Diameter | Bowl Depth |
|---|---|---|
| Small | 1 inch | 0.5 inch |
| Medium | 1.5 inches | 0.75 inches |
| Large | 2 inches | 1 inch |
3. Form the Stem
Use the same sharp knife to create a small hole on one side of the apple, near the top. This hole will be the mouthpiece of your pipe.
Connect the Mouthpiece
The last step in creating your apple pipe is to attach the mouthpiece. This will allow you to smoke the apple without burning your lips.
To connect the mouthpiece, you will need a straw or a pen. Insert the straw or pen into the hole that you created in the side of the apple. The straw or pen should fit snugly into the hole. If it is too loose, the mouthpiece will not be secure and will fall out when you smoke. If it is too tight, you will not be able to draw air through the pipe.
| Material | Pros | Cons |
|---|---|---|
| Straw | Cheap, easy to find | Can be flimsy, may not be durable |
| Pen | More durable than a straw, can be found in most homes | May have a taste or smell, may not be the ideal size |
Once you have inserted the straw or pen, you can secure it in place with a piece of tape or a rubber band. This will help to prevent the mouthpiece from falling out when you smoke.
Now that you have connected the mouthpiece, your apple pipe is complete. You can now enjoy your smoke!
Fashion the Carb Hole
The carb hole is essential for controlling the airflow into your pipe. You can choose to place the carb hole on the side of the pipe or on the bottom. If you choose to place it on the side, drill a small hole perpendicular to the bowl hole. If you choose to place it on the bottom, drill a small hole at an angle, aiming towards the bowl hole. Make sure the carb hole is large enough to allow for airflow, but small enough to maintain a proper seal.
Here’s a more detailed guide on how to create a carb hole:
- Mark the Location: Use a pen or pencil to mark where you want the carb hole to be located.
- Drill a Pilot Hole: Use a small drill bit to create a pilot hole at the marked location.
- Enlarge the Hole: Gradually increase the size of the drill bit until you reach the desired diameter for the carb hole.
- Ream the Hole: Use a reamer or sandpaper to smooth out the edges of the hole and create a clean finish.
- Check the Size: Insert a small paper clip or toothpick into the carb hole to ensure that it’s the appropriate size. It should create a slight resistance when pulled through, but not too much to restrict airflow.
- Polish the Hole (Optional): For a smoother and more professional finish, use a cotton ball or soft cloth to polish the carb hole with a small amount of wax or oil. This will help protect the hole from chipping or cracking over time.
How to Make an Apple Pipe
An apple pipe is a simple and affordable way to enjoy a cool and flavorful smoke. With just a few simple steps, you can create your own apple pipe in no time. Here’s how:
- Choose a firm, ripe apple. The type of apple you choose will affect the flavor of your smoke, so experiment with different varieties to find your favorite.
- Cut the apple in half. Use a sharp knife to cut the apple in half horizontally. This will create two halves, each with a stem.
- Remove the core from one half. Use a spoon or knife to remove the core from one of the apple halves. This will create a hole that will serve as the bowl of your pipe.
- Carve a small hole in the bottom of the bowl. This hole will allow the smoke to travel down the stem and into your mouth. Make sure the hole is small enough so that it doesn’t let too much smoke escape.
- Insert a straw into the hole in the stem. The straw will act as the mouthpiece of your pipe. Make sure that the straw is long enough to reach your mouth comfortably.
- Fill the bowl with your favorite smoking material. You can use tobacco, herbs, or even spices. Pack the bowl tightly, but not too tightly, so that the smoke can flow easily.
- Light the bowl and enjoy your smoke!
Frequently Asked Questions
How do I clean an apple pipe?
Apple pipes are easy to clean. Simply disassemble the pipe and wash each part with warm, soapy water. Rinse the parts thoroughly and allow them to dry completely before reassembling the pipe.
Can I use an apple pipe to smoke tobacco?
Yes, you can use an apple pipe to smoke tobacco. However, it’s important to note that tobacco smoke can damage the apple pipe over time. If you plan to smoke tobacco regularly, it’s best to invest in a dedicated tobacco pipe.
What are some other fruits that I can use to make a pipe?
You can use a variety of fruits to make pipes, including pears, oranges, and grapefruits. Experiment with different fruits to find your favorite flavor combination.
