1. How to Replace the Rear View Mirror on a 2015 Ford Fusion

The rear-view mirror is an essential safety feature that allows drivers to see what’s behind them. It can be difficult to see out of the rear-view mirror if it is dirty or damaged. Replacing the rear-view mirror is not a difficult task, but it does require some basic tools and materials. In this article, we will provide step-by-step instructions on how to replace the rear-view mirror on a 2015 Ford Fusion.

The first step is to gather all of the necessary tools and materials. You will need the following items:

• New rear-view mirror
• 7mm socket wrench
• Phillips head screwdriver
• Trim removal tool
• New mirror adhesive

Once you have gathered all of the necessary items, you can begin the replacement process. Here are the step-by-step instructions:

Identifying the Correct Mirror Assembly

Before purchasing a replacement rearview mirror, it’s crucial to identify the correct assembly for your 2015 Ford Fusion. Several factors can influence the type of mirror you need, including:

Vehicle Trim Level: Different trim levels of the Fusion may have mirrors with varying features, such as auto-dimming or compass displays.

Factory Options: Optional features, such as blind-spot monitoring or lane departure warning systems, may integrate with the rearview mirror, requiring a specific assembly.

Heated Mirror: Heated mirrors are a desirable feature in cold climates, and replacement assemblies must be compatible with this function.

To ensure you order the correct mirror assembly, consult your vehicle’s owner’s manual or contact a trusted auto parts supplier. They can assist you in identifying the compatible mirror based on your specific vehicle’s details.

Here’s a table summarizing the different mirror assemblies available for the 2015 Ford Fusion:

Mirror Assembly Type	Features
Standard Mirror	Manual adjustment, no additional features
Auto-Dimming Mirror	Automatically adjusts to reduce glare from headlights
Compass Display Mirror	Includes an integrated compass display
Blind-Spot Monitoring Mirror	Integrates blind-spot monitoring sensors
Lane Departure Warning Mirror	Integrates lane departure warning sensors
Heated Mirror	Heats the mirror surface to prevent fogging

Gathering Essential Tools and Materials

Replacing a rear-view mirror on a 2015 Ford Fusion requires specific tools and materials to ensure a secure and proper installation. Here’s a comprehensive list of everything you’ll need:

Tools

Phillips head screwdriver

Trim removal tool or plastic pry bar

Torx driver (T25 or T30)

Materials

New rear-view mirror assembly

Replacement mirror glass (if needed)

Isopropyl alcohol or other glass cleaner

Microfiber cloth or cleaning wipes

Disconnecting the Electrical Connection

Step 1: Locate the Electrical Connector

Grasp the rearview mirror housing firmly and carefully pull it straight downward to detach it from the windshield. This should expose the electrical connector attached to the mirror’s base.

Step 2: Identify the Release Mechanism

Look for a small button or lever on the electrical connector. This release mechanism is typically located at the side or top of the connector.

Step 3: Use a Trim Tool or Small Screwdriver [300 words]

Insert a trim tool or a small flat-head screwdriver into the release mechanism. Apply gentle pressure to depress the button or slide the lever. This will unlock the connection, allowing you to separate the electrical connector from the mirror housing.

Note: Be cautious not to damage the electrical connector or its wiring. If you encounter any resistance, double-check the release mechanism’s location and apply pressure accordingly.

Step 4: Disconnect the Electrical Connector

Once the release mechanism is disengaged, gently pull the electrical connector away from the mirror housing. Store the connector in a safe location to prevent damage or loss.

Removing the Old Mirror

To remove the old mirror, you’ll need to follow these steps:

1. Locate the release button or lever: The release button is typically located on the bottom or side of the mirror assembly. Press or pull the lever to release the mirror from its mounting.
2. Disconnect the electrical connector: If your mirror is equipped with electrical features like power adjustment or auto-dimming, you’ll need to disconnect the electrical connector before removing the mirror. This connector is usually a small, black plug located behind the mirror assembly.
3. Pull back the mirror assembly: Once the release button is pressed or the lever is pulled, gently pull back on the mirror assembly to disconnect it from the mounting bracket.
4. Use a screwdriver to remove the mirror bracket (Optional): In some cases, the mirror bracket may be held in place by screws or bolts. If present, use a screwdriver to remove these fasteners and disconnect the bracket from the windshield.

Tools	Materials
Phillips head screwdriver	New rear-view mirror assembly
Trim removal tool or plastic pry bar	Replacement mirror glass (if needed)
Torx driver (T25 or T30)	Isopropyl alcohol or other glass cleaner

Step	Action	Details
1	Locate release button or lever	Usually found on the bottom or side of the mirror assembly
2	Disconnect electrical connector (if applicable)	Small black plug located behind the mirror assembly
3	Pull back mirror assembly	Gently pull back to disconnect from mounting bracket
4	Remove mirror bracket (optional)	Using a screwdriver to remove screws or bolts holding the bracket

Installing the New Mirror

Now that you have removed the old rearview mirror, it’s time to install the new one. Here are the detailed steps involved:

1. Align the Mounting Plate

Position the new mirror’s mounting plate over the studs you exposed earlier. Make sure the studs fit snugly into the plate’s holes.

2. Secure the Mounting Plate

Tighten the mounting plate using a screwdriver or socket wrench. Apply just enough force to secure the plate firmly without overtightening.

3. Attach the Mirror Body

Align the mirror body with the mounting plate and slide it onto the studs. Make sure the mirror sits securely on the studs and is properly aligned.

4. Tighten the Mirror Body Screws

Use the provided screws or bolts to tighten the mirror body to the mounting plate. Do not overtighten the screws, as this can damage the mirror or its components.

5. Reconnect the Electrical Connection

If your rearview mirror has heated or auto-dimming features, you will need to reconnect the electrical connection. Locate the wires behind the mirror and securely plug them into the corresponding connectors on the new mirror. Ensure that the polarity is correct to avoid any electrical issues.

Wire Color	Connection
Red	Positive (+)
Black	Negative (-)
Yellow (if present)	Heated mirror

Reconnecting the Electrical Connection

Now that the mirror base is secured, it’s time to reconnect the electrical connection. Follow these steps for a successful reconnection:

1. Locate the Connector

Underneath the mirror base, you’ll find the electrical connector. It’s usually a black or gray plug with wires attached.

2. Inspect the Connector

Check for any damage or loose wires. If you find any, address them before proceeding.

3. Align the Connector

Line up the electrical connector on the mirror base with its corresponding receptacle on the windshield.

4. Push and Twist

Gently push and twist the connector clockwise until it snaps into place. Ensure that the connector is firmly seated.

5. Double-Check the Connection

Tug gently on the connector to make sure it’s securely connected. This will prevent any electrical issues later.

6. Reverse Engineering the Removal Process

To complete the reconnection, repeat the steps from the removal process in reverse order:

Removal Step	Reconnection Step
Remove the adhesive tape	Apply new adhesive tape
Disconnect the electrical connector	Connect the electrical connector
Loosen the mounting bracket	Tighten the mounting bracket
Remove the rearview mirror	Insert the rearview mirror

Adjusting the Mirror Position

Once the new mirror is installed, you’ll need to adjust its position for optimal rear visibility:

1. Manual Adjustment: Some mirrors are manually adjustable using a joystick or lever located at the base of the mirror. Move the joystick or lever to tilt the mirror up, down, left, or right until the desired view is achieved.
2. Electric Adjustment: Electric mirrors are controlled by buttons or switches typically located on the driver’s side door panel. Use the buttons to move the mirror up, down, left, or right.
3. Remote Adjustment: Some newer models have remote mirrors that can be adjusted using a key fob or smartphone app. Check your owner’s manual for specific instructions on remote adjustment.
4. Memory Settings: If your vehicle has memory seats, it may also have memory settings for the rearview mirror. Once the mirror is adjusted to your preferred position, press the memory seat button to save the settings.
5. Anti-Glare Feature: Many rearview mirrors have an anti-glare feature to reduce glare from headlights behind you. To activate the anti-glare feature, flip the lever or switch located at the bottom of the mirror.
6. Dimming Feature: Some mirrors have an automatic dimming feature that adjusts the mirror’s brightness based on the ambient light conditions. This feature helps reduce eye strain, especially at night.
7. Compass Display: Some rearview mirrors incorporate a digital compass that displays the vehicle’s current heading. This feature can be helpful for navigation and orientation.

Tightening the Mirror Assembly

Before securing the rearview mirror, tighten all electrical connections.

1. Ensure that all the connections are firmly attached to the pins on the mirror assembly.

2. If there are any loose wires, gently press them into place until they click into position.

3. After all connections are securely fastened, raise the mirror assembly back onto the windshield.

4. Line up the mirror assembly with the existing mounting brackets on the windshield.

5. Press down firmly on the base of the mirror assembly to ensure it is properly seated and secure.

Cleaning the Mirror Surface

To clean the rear view mirror surface, follow these steps:

1. Gather your materials:

You will need a clean microfiber towel, a glass cleaner, and a soft brush.

2.

Dampen the microfiber towel with glass cleaner:

Avoid spraying the glass cleaner directly onto the mirror, as it can damage the mirror coating.

3.

Wipe down the mirror surface:

Gently wipe the mirror surface with the damp microfiber towel in a circular motion. Avoid using abrasive cleaners or scrubbing pads, as they can scratch the mirror.

4.

Dry the mirror surface:

Use a clean microfiber towel to dry the mirror surface. This will help prevent streaks and smudges.

5.

Remove any stubborn dirt or grime:

If there is any stubborn dirt or grime on the mirror surface, you can use a soft brush to gently remove it. Be careful not to scratch the mirror.

6.

Clean the edges of the mirror:

Use a damp microfiber towel to clean the edges of the mirror. This will help remove any dust or debris that may have accumulated.

7.

Inspect the mirror surface:

Once you have cleaned the mirror surface, inspect it for any streaks or smudges. If there are any remaining streaks or smudges, repeat the cleaning process.

8.

Clean the mirror frame:

Use a damp microfiber towel to clean the mirror frame. This will help remove any dust or debris that may have accumulated.

9.

Dry the mirror and frame:

Use a clean microfiber towel to dry the mirror and frame. This will help prevent streaks and smudges. Your rear view mirror should now be clean and streak-free.

Testing the New Mirror

Once the new rearview mirror has been installed, it’s important to test it to ensure it’s functioning properly. Follow these steps to test the mirror:

1. Adjust the Mirror: Adjust the position and angle of the mirror so that you have a clear view of the rear without any blind spots.
2. Check for Vibration: Drive the vehicle over rough roads or bumps to check if the mirror vibrates excessively or moves out of place.
3. Test Day and Night Visibility: Drive the vehicle at different times of day to make sure the mirror provides good visibility in both bright sunlight and low-light conditions.
4. Check the Auto-Dimming Feature (if applicable): If your mirror has an auto-dimming feature, cover the mirror sensor with your hand or a piece of paper to simulate oncoming headlights. The mirror should darken automatically to reduce glare.
5. Test the Blind Spot Monitoring System (if applicable): If your mirror has a blind spot monitoring system, activate the system by turning on the turn signal. Check for the indicator lights on the mirror to ensure they illuminate when a vehicle is detected in the blind spot.
6. Check the HomeLink System (if applicable): If your mirror has a HomeLink system, test it by programming it to open your garage door or gate.
7. Check the Compass (if applicable): If your mirror has a compass, check its accuracy by comparing it to a known reference point, such as the sun or a GPS device.
8. Test the Microphone (if applicable): If your mirror has a built-in microphone, test its functionality by talking into it and confirming that your voice is transmitted properly.
9. Check for Loose Connections: Inspect the electrical connections to ensure they are secure and free from corrosion.
10. Drive for an Extended Period: Drive the vehicle for an extended period to ensure the mirror remains stable and does not cause any discomfort or distraction while driving.

How to Replace a Rear View Mirror on a 2015 Fusion

Replacing the rearview mirror on a 2015 Fusion is a relatively simple task that can be completed in a matter of minutes. Here are the steps on how to do it:

1. Gather your materials. You will need a new rear view mirror, a screwdriver, and a cloth.
2. Locate the two screws that hold the rear view mirror in place. They are located on the bottom of the mirror.
3. Remove the screws. Be careful not to drop them.
4. Gently pull the rear view mirror straight towards you to detach it from the windshield.
5. Align the new rear view mirror with the windshield and press it into place.
6. Insert the screws into the holes on the bottom of the mirror and tighten them until they are snug.
7. Use a cloth to clean any smudges or fingerprints from the mirror.

People Also Ask

What size is the rearview mirror on a 2015 Fusion?

The rearview mirror on a 2015 Fusion is 11.5 inches wide and 3 inches tall.

How do I adjust the rearview mirror on a 2015 Fusion?

To adjust the rearview mirror on a 2015 Fusion, simply use the lever located on the bottom of the mirror. You can move the mirror up, down, left, and right to get the desired view.

Can I replace the rearview mirror on my 2015 Fusion myself?

Yes, replacing the rearview mirror on a 2015 Fusion is a simple task that can be completed in a matter of minutes. You do not need any special tools or skills to do it.