Setting up the DDL 8700 is a relatively straightforward task that can be accomplished in just a few minutes. However, there are a few key steps that must be followed in order to ensure that the system is properly configured and ready to use. In this article, we will provide step-by-step instructions on how to set up the DDL 8700. We will also provide troubleshooting tips in case you encounter any problems along the way.
Here are some things you’ll need before you can start setting up your DDL 8700:
- A computer with an Ethernet port
- An Ethernet cable
- A power cable
- The DDL 8700
- The DDL 8700 software
First, connect the DDL 8700 to your computer using the Ethernet cable. Then, connect the power cable to the DDL 8700 and plug it into an outlet. Once the DDL 8700 is powered on, it will begin to search for your computer. If your computer is connected to the same network as the DDL 8700, it should be able to find it automatically.
Once your computer has found the DDL 8700, you will need to install the software. The software can be downloaded from the DDL website. Once the software is installed, you will be able to configure the DDL 8700. The configuration process is simple and straightforward. Simply follow the instructions on the screen. Once the DDL 8700 is configured, you will be able to use it to print and scan documents.
Unboxing and Component Overview
Step 1: Unboxing
Open the Ddl 8700 box carefully. Inside, you will find the following components:
– Ddl 8700 main unit
– HDMI cable
– USB cable
– Power adapter
– Remote control
– User manual
Main Unit
The Ddl 8700 main unit is a compact and aesthetically pleasing device measuring approximately 10 x 6 x 2 inches. The front panel features a sleek, glossy finish and houses a large LED display that provides clear and concise information about the player’s status. On the rear panel, you will find various connectivity ports, including HDMI, USB, and Ethernet.
Remote Control
The included remote control is ergonomically designed to fit comfortably in your hand. It provides easy access to all essential playback functions, such as power, volume, navigation, and media control. The buttons are clearly labeled and responsive, allowing for intuitive operation.
HDMI and USB Cables
The Ddl 8700 comes with both HDMI and USB cables for connecting it to your TV and other external devices. The HDMI cable transmits high-quality video and audio signals, while the USB cable enables data transfer and device charging.
Power Adapter
The power adapter provides the Ddl 8700 with the necessary power for operation. It features a standard AC plug and a detachable power cord, making it easy to connect and disconnect from different power sources.
User Manual
The included user manual provides detailed instructions and technical specifications for the Ddl 8700. It covers everything from setting up and configuring the player to troubleshooting common issues.
Assembling the Base and Turntable
To assemble the base, begin by connecting the two side panels to the bottom panel using the provided screws. Once the side panels are in place, attach the top panel to the base by aligning the holes and securing it with the remaining screws.
Assembling the Turntable
To assemble the turntable, follow these detailed steps:
- Lay out the turntable chassis on a flat surface and align the drive belt with the motor pulley.
- Position the turntable platter on the center bearing and gently set it in place, ensuring it sits level.
- Install the platter mat onto the turntable platter.
- Attach the hinged dust cover by aligning the hinges with the designated slots on the turntable chassis.
- Secure the dust cover in place using the provided screws or latches.
- Connect the turntable to an amplifier or receiver using the appropriate cables (e.g., RCA or XLR).
Refer to the table below for a summary of the turntable assembly steps:
| Step | Description |
|---|---|
| 1 | Align drive belt with motor pulley |
| 2 | Mount turntable platter and platter mat |
| 3 | Attach hinged dust cover |
| 4 | Secure dust cover with screws/latches |
| 5 | Connect turntable to audio system |
Calibrating the Turntable
1. Leveling the Turntable
Place the turntable on a flat, level surface. Use a level to ensure the turntable is level both front-to-back and side-to-side. This will help prevent the turntable from skipping and ensure accurate playback.
2. Setting the Stylus Force
The stylus force is the amount of pressure exerted by the stylus on the record. Refer to the manufacturer’s specifications for the recommended stylus force for your cartridge. Use a stylus force gauge to measure and adjust the stylus force accordingly.
3. Aligning the Cartridge
Align the cartridge so that the stylus is parallel to the grooves on the record. Use a cartridge alignment protractor to ensure the cartridge is aligned in both the vertical and horizontal planes.
4. Tracking Force and Anti-Skate
Tracking force is the force that keeps the stylus in contact with the record groove. Adjust the tracking force to the recommended value for your cartridge. Anti-skate compensates for the skating force that causes the stylus to drift toward the center of the record. Adjust anti-skate to the recommended value to prevent this.
5. Balancing the Tonearm
The tonearm should be balanced so that it floats freely when the stylus is not in contact with the record. Use the counterweight provided with the turntable to adjust the balance of the tonearm.
6. VTA (Vertical Tracking Angle) and Azimuth
VTA is the angle at which the stylus contacts the record. Set the VTA by adjusting the height of the tonearm. Azimuth is the angle at which the stylus is aligned with the record’s surface. Adjust azimuth by rotating the cartridge body in the headshell.
| VTA Adjustment | Azimuth Adjustment |
|---|---|
| Raises or lowers the tonearm’s height | Rotates the cartridge body in the headshell |
| Impacts stylus contact with the record groove | Ensures the stylus is correctly aligned with the record’s surface |
| Optimizes frequency response and channel balance | Improves soundstage accuracy and minimizes distortion |
How To Set Up Ddl 8700
1. **Unpack the DDL-8700.** This will include the following items:
- The DDL-8700 base unit
- Two antennas
- A power adapter
- An Ethernet cable
- A USB cable
2. **Connect the antennas to the DDL-8700.** The antennas should be screwed onto the connectors on the back of the unit.
3. **Connect the power adapter to the DDL-8700.** The power adapter should be plugged into a power outlet.
4. **Connect the Ethernet cable to the DDL-8700.** The Ethernet cable should be plugged into an Ethernet port on your router or modem.
5. **Connect the USB cable to the DDL-8700.** The USB cable should be plugged into a USB port on your computer.
6. **Power on the DDL-8700.** The power switch is located on the back of the unit.
7. **Wait for the DDL-8700 to boot up.** This will take a few minutes.
8. **Log in to the DDL-8700.** The default username is “admin” and the default password is “password”.
People Also Ask
How do I reset the DDL-8700 to factory defaults?
To reset the DDL-8700 to factory defaults, press and hold the reset button on the back of the unit for 10 seconds.
How do I update the firmware on the DDL-8700?
To update the firmware on the DDL-8700, download the latest firmware from the D-Link website and follow the instructions in the firmware update guide.
How do I troubleshoot problems with the DDL-8700?
If you are having problems with the DDL-8700, please refer to the troubleshooting guide on the D-Link website.
