Step into a world of pristine carpets with the Bissell Proheat Carpet Cleaner, a revolutionary cleaning system designed to elevate your home maintenance routine. This powerful machine harnesses advanced technology to effortlessly tackle stubborn dirt, leaving your carpets looking refreshed and revitalized. Embark on a journey of spotless floors with the Bissell Proheat Carpet Cleaner, your ultimate companion in the battle against grime.
Operating the Bissell Proheat Carpet Cleaner is a breeze. Begin by filling the clean water tank with warm tap water and the appropriate amount of cleaning solution. The innovative HeatWave Technology ensures that the cleaning solution remains at an optimal temperature throughout the cleaning process, maximizing its effectiveness against dirt and stains. Next, select the desired cleaning mode: Express Clean for quick touch-ups or Deep Clean for thorough sanitization. With its user-friendly controls and intuitive design, the Bissell Proheat Carpet Cleaner empowers you to achieve professional-grade cleaning results in the comfort of your own home.
As the Bissell Proheat Carpet Cleaner glides over your carpets, its powerful suction system effortlessly extracts dirt, debris, and allergens, leaving your floors sparkling clean and sanitized. The rotating DirtLifter PowerBrush loosens deep-down grime, while the Dual DirtLifter Technology separates and removes dirt from the carpet fibers. The large-capacity dirty water tank ensures uninterrupted cleaning sessions, allowing you to cover large areas without pausing to empty it. With the Bissell Proheat Carpet Cleaner, maintaining spotless carpets has never been easier or more efficient.
Filling the Solution Tank
Before you begin cleaning your carpets, you need to fill the solution tank with the appropriate cleaning solution. The Bissell Proheat Carpet Cleaner uses a 2-in-1 formula that both cleans and protects your carpets. To fill the solution tank:
- Remove the solution tank from the cleaner by lifting it up and pulling it towards you.
- Unscrew the cap on the solution tank and fill it with the 2-in-1 cleaning solution up to the fill line.
- Replace the cap on the solution tank and insert it back into the cleaner.
Here are some additional tips for filling the solution tank:
- Do not overfill the solution tank. Overfilling can cause the cleaner to leak.
- Do not use any other cleaning solution in the Bissell Proheat Carpet Cleaner. Other cleaning solutions may damage the cleaner or your carpets.
- If you are using the Bissell Proheat Carpet Cleaner to clean pet stains, you may need to add the Bissell Pet Stain & Odor Remover to the solution tank.
Solution Tank Capacity
| Tank Capacity |
|—|—|
| 1 gallon |
Cleaning Your Carpets
1. Preparing Your Carpet for Cleaning
Before starting the cleaning process, remove any furniture or objects from the carpet. Vacuum thoroughly to remove any loose dirt or debris.
2. Assembling the Carpet Cleaner
Follow the instructions provided by the manufacturer to assemble the carpet cleaner. Make sure all attachments are securely fastened.
3. Filling the Solution Tank
Fill the solution tank with the recommended amount of carpet cleaning solution. Avoid overfilling the tank.
4. Filling the Recovery Tank
Fill the recovery tank with clean water. Ensure it is not overfilled, as this can affect the cleaning performance.
5. Cleaning the Carpet
Begin cleaning by holding the carpet cleaner firmly against the carpet. Pull the trigger to dispense the cleaning solution and move the cleaner back and forth in parallel strokes. Overlap strokes slightly to ensure complete coverage.
Pay special attention to heavily soiled areas. Use the deep cleaning button for stubborn stains. To remove excess moisture, pull the trigger without pressing the deep cleaning button.
Continue cleaning the carpet until it appears clean. Avoid walking on the wet carpet until it has fully dried.
| Carpet Type | Drying Time |
|---|---|
| Nylon | 6-8 hours |
| Wool | 12-24 hours |
| Cotton | 10-12 hours |
Troubleshooting Common Problems
If you are encountering issues with your Bissell Proheat Carpet Cleaner, refer to the following troubleshooting tips:
1. Machine Not Spraying Solution
Check the solution tank to ensure it is filled with a mixture of Bissell cleaning solution and water. Make sure the solution hose is not clogged or kinked.
2. Carpet Not Getting Clean
Ensure the brush roll is rotating properly and the dirty water tank is empty. Use the “Power Rinse” feature to thoroughly flush debris from the carpet.
3. Excessive Water Left on Carpet
Empty the dirty water tank frequently to prevent the machine from leaving too much water behind. Adjust the suction level to “Dry” or “Low” to increase vacuuming power.
4. Strange Noises or Smells
Inspect the brush roll for any foreign objects or debris that may be causing noises. Clean or replace the filter if it is dirty or clogged.
5. Machine Leaking
Check the seals and gaskets on the machine for any cracks or damage. Tighten any loose bolts or screws. If the leak persists, contact Bissell customer support.
6. Motor Not Running
Ensure the machine is plugged into a functioning power outlet. Check the circuit breaker or fuse to make sure there is no power outage. Reset the machine by turning it off and back on.
7. Water Tank Not Filling
Make sure the water hose is properly connected to the machine and the water supply. Check the water pressure by running water from the hose directly.
8. Brush Roll Not Rotating
Unplug the machine and remove any debris or hair that may be wrapped around the brush roll. Make sure the belt is properly connected to the brush roll and motor.
9. Buttons Not Responding
Check the control panel for any dirt or debris that may be interfering with the buttons. Unplug the machine for a few minutes and then plug it back in to reset the electronics.
10. Carpet Drying Slowly
Increase the air circulation in the room by opening windows or using fans. Dry the carpet thoroughly before walking on it to prevent re-soiling.
| Common Problem | Troubleshooting Tips |
|—|—|
| Machine Not Spraying Solution | 1. Check solution tank is filled
2. Check solution hose for clogs or kinks |
| Carpet Not Getting Clean | 1. Check brush roll is rotating
2. Empty dirty water tank
3. Use “Power Rinse” feature |
| Excessive Water Left on Carpet | 1. Empty dirty water tank frequently
2. Adjust suction level to “Dry” or “Low” |
| Strange Noises or Smells | 1. Inspect brush roll for debris
2. Clean or replace filter |
How to Work a Bissell ProHeat Carpet Cleaner
The Bissell ProHeat Carpet Cleaner is a powerful and easy-to-use carpet cleaner that can remove dirt, stains, and pet hair from your carpets. Here are the steps on how to work a Bissell ProHeat Carpet Cleaner:
- Fill the clean water tank. The clean water tank is located on the front of the machine. Fill the tank with hot water and add the recommended amount of Bissell carpet cleaning solution.
- Attach the cleaning head. The cleaning head is located on the bottom of the machine. Attach the cleaning head to the machine by aligning the tabs on the head with the slots on the machine.
- Turn on the machine. Press the power button to turn on the machine. The machine will start to vacuum your carpet.
- Start cleaning. Push the machine forward and backward over the area you want to clean. The machine will automatically dispense water and cleaning solution onto the carpet.
- Rinse the carpet. When you have finished cleaning an area, press the rinse button. The machine will rinse the carpet with clean water.
- Empty the dirty water tank. When the dirty water tank is full, press the empty button. The dirty water tank is located on the back of the machine.
Here are some additional tips for using the Bissell ProHeat Carpet Cleaner:
- Test the cleaning solution on a small area of carpet before using it on the entire carpet.
- Use the appropriate cleaning solution for the type of carpet you are cleaning.
- Do not overwet the carpet.
- Allow the carpet to dry completely before walking on it.
People Also Ask
How often should I use a carpet cleaner?
You should use a carpet cleaner every 6 to 12 months, or more often if you have pets or children.
What is the best carpet cleaning solution to use?
The best carpet cleaning solution to use is one that is specifically designed for your type of carpet. You can find carpet cleaning solutions at most home improvement stores.
How do I clean a heavily soiled carpet?
If you have a heavily soiled carpet, you may need to use a stronger cleaning solution or rent a professional carpet cleaner.
